Series 3A Impact Weigher
The Series 3A impact weigher (shown in yellow) uses a single impact sensing plate to intercept all the mineral being discharged from a conveyor into a storage silo prior to despatch by rail.
Series 3A Impact Weigher Complete with Internal Sampler
A built-in sampler allows a small sample of production to be obtained over the production period that is representative of the mineral that has been produced.
|Accuracy||+ or – 0.5% of true weight.|
|Capacity||Up to 100 tonnes per hour.|
|Protection||IP65 to AS 1939.|
|Power Supply||110/220/240 Vac, 50Hz.|
|Measurements||Mass flow rate; Batch weight; Total weight.|
|Outputs||4 to 20 mA; 0-5 Vdc; pulses per tonne; RS232C or RS485.|
|Calibration constants||8 or more|
|Production statistics||Min/Max/Average flow rates over the period.|